Ampreg 30 has been optimised for the manufacture of large composite structures using hand layup and vacuum bagging techniques whilst offering improved health and safety through the careful selection of low toxicity raw materials.
The relatively low initial mixed viscosity of Ampreg 30 allows easy w..
Ampreg 36 is Gurit™s premium epoxy laminating system and is particularly suitable for the manufacture of large, high-performance composite structures, whilst offering improved health and safety through the careful selection of low toxicity raw materials. The product's superior laminate mechanical pr..
Epoxy system designed for the production by casting decorative objects, bottles prototypes, jewellery... Very low reactivity allows high thickness without change of colour cast.
Obtaining a polymer with high clarity, good brightness and colourless.
Cures at room temperature, if necessary ..
The resin PB 170 with the hardener DM03 gives a foam with around 170kg/m3 in free expansion. This system is white although it can be tinted with compatible pigments.
The hardener influences both the hardening speed and the casting thickness
The mix evolves in two stages:Rapid expansion of the cast..
AMPRO is a simple to use, all-purpose epoxy which can be used for gluing, coating, laminating and filling. With its fast, low temperature curing hardener and easy 3:1 mix ratio by volume, AMPRO provides a quick and convenient way of using one epoxy system for a very wide range of tasks.
AMPRO has be..
Quick Repair System Handipack is a multi-purpose epoxy, supplied only in a small pack. It is designed for quick repair work and small scale construction jobs. The system is extremely reactive with a pot-life of just 8 minutes at 20°C. It is therefore best suited to small tasks, and should not be app..
Sabatack 715 is a 1-component, elastic, (air) moisture-curing MS polymer-based adhesive with low viscosity for bonding various (plate) materials. Your benefits open time of 60 minutes approx. tensile strength (Fmax) of 2.0 N/mm approx. hardness Shore A of 35 approx. elongation at break of 250% appro..
Sabatack® 720 is a 1-component MS polymer-based sealant and light adhesive. Its primary use is to seal seams, overlaps, joints and cracks.Can be painted wet-on-wet.
Open time of 14 minutes approx.
tensile strength (Fmax) of 2.8 N/mm² approx.
hardness Shore A of 50 approx.
elongation at break of 14..
Sabatack® 750 XL is a 1-component, MS polymer-based construction adhesive and sealant with a long open time. Its primary use is for easy, elastic bonding of frames, profiles, plates, etc. with high end strength. Also suitable for sealing seams, overlaps and joints. Can be painted wet-on-wet. Your be..
Sabatack® 760 XL HT is suitable for bonding and sealing mineral glass and synthetic windows.
It is a 1-component, elastic, (air) moisture-curing, MS polymer-based adhesive with extra high initial tack (sag-resistant) and a high end strength.extra high resistance to sag flow and high tack open time..
Sabatack® 780 is a stable 1-component MS polymer-based construction adhesive and sealant. Its primary use is for elastic bonding of frames, profiles, plates, etc. with high green strength (stability) and high end strength. Also suitable for sealing seams, overlaps and joints. Can be painted wet-on-w..